OUR PRODUCT RANGE

Equipment for every foundation.

Explore drilling tools, replacement parts and fabricated components. Check the application and ask us to confirm dimensions and compatibility before ordering.

26 products and product families
26 results
Solid Wire Rope Thimble01
Wear Parts

Solid Wire Rope Thimble

Solid wire rope thimble for wire rope end connections. Share the rope diameter, required dimensions, connection arrangement and application to confirm the correct size and suitability before ordering.

View product
Rotary Head Plastic Sliding Pads02
Wear Parts

Rotary Head Plastic Sliding Pads

Rotary head plastic sliding pads made from POM (polyoxymethylene), supplied in customer-requested sizes to match the drilling rig. Send the rig make and model, pad length, width, thickness, mounting-hole positions, and a drawing or sample to confirm the required configuration.

View product
Drilling Bucket Helical Springs03
Wear Parts

Drilling Bucket Helical Springs

Replacement helical springs for drilling buckets used in foundation drilling. Share the bucket model, spring outside diameter, wire diameter, free length, end configuration and required quantity to confirm the correct replacement.

View product
Roller Bits04
Cutting Tools

Roller Bits

8-1/2-inch roller bits for foundation drilling tool inquiries. Confirm the mounting arrangement, cutting layout and ground conditions with the tool drawing before selecting a replacement. Other sizes are not listed.

View product
Center Pilot Attachment & Holder05
Wear Parts

Center Pilot Attachment & Holder

Center pilot attachment and holder assembly shown with a fastening bolt and nut. Confirm pilot dimensions, mounting interface and fit for the drilling tool before ordering.

View product
BFZ70 Tooth06
Wear Parts

BFZ70 Tooth

BFZ70 replacement cutting tooth for foundation drilling tools. Check the tooth dimensions and its mating holder before ordering; the BFZ70 holder is listed separately. Send a drawing or measurements of the existing assembly to review fit.

View product
BFZ70 Holder07
Wear Parts

BFZ70 Holder

BFZ70 tooth holder for the cutting assembly of foundation drilling tools. The BFZ70 tooth is listed separately. Confirm the holder mounting dimensions, tooth seating and installation layout against the existing tool or drawing.

View product
C31HD Tooth08
Wear Parts

C31HD Tooth

C31HD replacement cutting tooth for foundation drilling tools. Specify the shank dimensions, holder seating and required quantity. A model code alone does not confirm fit; send the existing part measurements or a drawing for review.

View product
C30 Square & Round Holders09
Wear Parts

C30 Square & Round Holders

C30 tooth holders available in square and round shapes. Confirm the mounting dimensions and tooth compatibility before ordering.

View product
B-47K22H Cutting Tooth10
Wear Parts

B-47K22H Cutting Tooth

B-47K22H replacement cutting tooth for foundation drilling equipment. Compare the shank and seating dimensions with the existing holder, and describe the tool and ground conditions. Confirm the required configuration and quantity before ordering.

View product
HQ Round Holders11
Wear Parts

HQ Round Holders

HQ round tooth holders available with or without carbide buttons. Confirm socket dimensions, mounting details and tooth compatibility before ordering.

View product
B43 Holder12
Wear Parts

B43 Holder

B43 replacement tooth holder for foundation drilling tools. Send the tooth dimensions, holder mounting measurements and installation drawing or sample details. The required tooth and its fit must be confirmed separately before supply.

View product
Rock Augers13
Foundation Tools

Rock Augers

Straight and conical rock augers for rotary foundation drilling with bullet teeth. Standard Kelly box: 200×200 mm. Confirm the diameter, flight geometry, pilot and rig interface for each order.

View product
Rock Buckets14
Foundation Tools

Rock Buckets

Rock drilling buckets with cutting teeth for foundation work. Standard Kelly box: 200×200 mm. Confirm the diameter, teeth, shell and rig interface for each order.

View product
Cleaning Bucket15
Foundation Tools

Cleaning Bucket

Cleaning bucket for clearing loose material from the bottom of foundation boreholes. Standard Kelly box: 200×200 mm. Confirm bucket diameter, bottom configuration and rig interface before ordering.

View product
Wire Tremie Pipe Set16
Foundation Tools

Wire Tremie Pipe Set

Wire tremie pipe set for foundation concrete placement in 8-inch and 10-inch sizes. The full set includes a hopper, lift and suspension jig. Confirm the pipe length, connections and set configuration before ordering.

View product
Core Barrels17
Foundation Tools

Core Barrels

Core barrels for cutting an annular ring in rock and hard formations, with bullet teeth or roller bits. Standard Kelly box: 200×200 mm. Confirm the rig interface before ordering.

View product
Casing & Components18
Casing

Casing & Components

Foundation drilling casing and related components for bore support and casing operations. Diameter, wall arrangement, joint type, length and tool interface are confirmed for the project before supply.

View product
Casing Drive19
Casing

Casing Drive

Casing drive for the connection between a drilling rig and casing during casing operations. Specify the casing diameter, mating connection and rig interface. Confirm engagement dimensions and the complete assembly against a drawing before ordering.

View product
CFA Augers20
Foundation Tools

CFA Augers

Continuous flight auger sections and configurations for foundation drilling applications. Diameter, length, flight pitch, center tube and connection are selected to suit the project and drilling system.

View product
Kelly Box & Adapter21
Drive Systems

Kelly Box & Adapter

Heavy-duty square Kelly boxes for rotary drilling tools in 150×150, 200×200 and 250×250 mm, plus a Kelly adapter with a 250×250 mm female connection and a 200×200 mm male connection. The standard tool connection is 200×200 mm; confirm pin-hole layout, engagement length and rig interface before ordering.

View product
Kelly Bar Repair22
Drive Systems

Kelly Bar Repair

Repair services for interlocking and friction Kelly bars used on rotary drilling rigs, plus conversion from friction Kelly bar to interlocking Kelly bar following technical assessment. Share photos, dimensions, the rig model and the required repair or conversion so the scope and compatibility can be confirmed.

View product
Kelly Box Pins23
Drive Systems

Kelly Box Pins

Kelly box pins in outside diameters of 50 or 60 mm and corresponding lengths of 320 or 400 mm. Confirm the pin hole position and rig/tool interface before ordering.

View product
Pile Testing Reaction Beam24
Fabricated Components

Pile Testing Reaction Beam

Fabricated reaction beam for pile load testing inquiries. Configuration, length, connections and load rating must be engineered and confirmed for the testing arrangement.

View product
Customized Bentonite & Water Tank25
Fabricated Components

Customized Bentonite & Water Tank

Custom fabricated tank for bentonite slurry or water handling on foundation projects. Confirm required capacity, dimensions, lifting points, access and pipe connections for each project.

View product
Bi-Directional Static Axial Load Plate26
Fabricated Components

Bi-Directional Static Axial Load Plate

Custom-made load plate for bi-directional static axial load testing. Plate diameter, thickness, openings and layout are manufactured to confirmed project drawings. Include the required dimensions, testing arrangement and design requirements with your quotation request.

View product
COMPARE OPTIONS

Compare up to three products

Review published product information, then share your project details to confirm suitability.

EmailWhatsApp